Crimping and tooling; Industry standards

Where industry standards are specified for crimp terminals and tooling, they need to be adhered to and sourced. Through our manufacturers we can supply crimps, lugs and tooling with many approvals including; CE, CSA, UL, DIN, IEC, GS, DNV and German Lloyd. If you have specific requirements, please Contact Us. We are frequently asked for crimp terminals, cable lugs and wire end ferrules that have DIN approval. DIN stands for “Deutsches Institut für Normung” meaning, “German Institute for Standardisation” and is widely specified throughout Europe.... Our most common request is for DIN approved copper tube terminals or cable lugs. Klauke DIN Series Lugs are to DIN46235 and Klauke DIN Series Butts are to DIN46267 part 1. For solderless terminals or sheet terminals to DIN46234, and DIN46230 please see the Klauke ranges at Un-insulated Ring Terminals, and Un-insulated Pin Terminals. Klauke also have a range of Pre-insulated Crimp Terminals to DIN46237 and DIN46231, please Contact Us for details. DIN46239 refers to Aluminium Lugs and Bi-Metallic Ring Terminals and DIN46267 part 2 refers to Aluminium Through Connectors. These lugs and connectors are designed for non-tension connections of aluminium cables to DIN48201 part 1 and DIN EN 50182. Please note that it is the Klauke ranges that are approved to DIN in these sections. There are also Bi-Metallic Pins and Bi-Metallic Compression Joints from Klauke that are designed for non-tension connections of aluminium cables to DIN48201 part 1 and DIN EN 50182. Klauke Un-insulated Wire End Ferrules are to DIN46228 part 1 and if you need insulated cable end sleeves or ferrules to DIN46228 part 4 please go to German Colour Coded Insulated Ferrules, French Colour Coded Insulated Ferrules or DIN Colour Coded Insulation Ferrules. Please Contact Us if you need pricing, availability, samples or more technical information.

Crimping and tooling; Industry standards